At first, it may seem like the only HVAC component you need to maintain during the colder months is the heating system. After all, this is the part that’s mainly at work in keeping your drivers warm and comfortable during winter. 

However, it pays to remember that having a well-maintained air conditioning system during these months is just as important. You must see to it that both heating and cooling components of your fleets’ HVAC systems are in working order. Doing so prevents moisture buildup inside your trucks and keeps other systems running smoothly. 

One smart strategy to maintain your air conditioning system is to actively watch out for issues, like the following: 

1. A/C Leaks 

Leaks are among the most critical issues you’ll need to keep an eye out for. With that said, it’s also worth mentioning that finding leaks can be quite challenging as they can be very small.

Despite their size, they can bring massive damages to your fleets. This is because they create openings in your vehicles that let the refrigerant out and contaminants in. Furthermore, the longer a leak is present, the higher the chances of moisture having entered the system. If left unaddressed, A/C leaks can be disastrous. 

To detect leaks early, use a blacklight with ultraviolet or UV fluorescent dye. Areas where the UV dye fluoresces brightly are most likely the sites of the leak. 

2. Malfunctioning Blend Doors 

Blend doors direct where the warm or cool air will flow through. Because of this, they perform a key role in how efficiently your cabin heats up. 

On that note, you should keep in mind that blend doors can be worn out by the cold weather easily. To check they are still working properly, check all locations where air flows out. You will know that they are still functioning well if there is enough air output through each door.  

3. Abnormally High Humidity 

You must also be on the lookout for the humidity levels in your fleets. If you or your drivers begin to notice an unusual increase in humidity inside the cabin, your truck may have a malfunctioning accumulator or dryer. 

An accumulator contains an essential part: the desiccant bag. This bag absorbs residual moisture in your fleets’ system. However, if it has reached its maximum capacity, it can no longer absorb moisture. What it will do instead is circulate it back throughout the system. 

The only way to remove moisture from the A/C system is by using an EPA-compliant recovery, recycle, recharge (RRR) machine. This can also prolong the life of the compressor and the other components of your fleets’ system. 

Conclusion 

When preparing for winter, you must strive to maintain both the heating and cooling components of your fleets’ HVAC systems. Doing so will help you stay on top of potential issues such as the ones mentioned above. Ultimately, it helps you repair systems and keeps your vehicles in tiptop condition. For the best results, consider enlisting professional vehicle and equipment service solutions. 

Do you require heavy equipment HVAC service in Ontario? We can help! At Simplicity Air, we are a one-stop-shop for installing and servicing mobile HVAC units for both on and off-road vehicles. Get in touch with us today to learn how we can help you!

There is no machine or system that lasts forever. Wear and tear will take its toll eventually. This is a concern for any business that owns a fleet of commercially-used vehicles, especially now that winter is coming. Eventually, your hose pipes will clog and drip up, which may leave you in need of a slew of heavy-duty HVAC replacement parts. 

The symptoms of HVAC problems in your fleet

The following are some signs that your HVAC systems are in need of some repair. If your drivers are complaining about any of the following, make sure to bring the vehicles in for an inspection.

What you can do about it

The troubleshooting, repairs, and handling of HVAC parts should be left to the professionals, but there are quite a few preventative measures you can enact. Among them are the following:

There are other things you can do, but these might need sophisticated equipment. These are probably best left to technicians. 

What needs to happen

Some of the most common issues in the A/C systems of commercial vehicles involve a simple replacement of the heavy-duty HVAC parts. Here are some of the most commonly-replaced and repaired parts and their functions:

1. The belts

A fan belt or drive belt is a connection from your car’s engine to the front-mounted accessories. It helps transfer some kinetic energy to rotate the water pump and engine fan, which keeps the engine block and surrounding parts cool and ventilated. Eventually, this will dry out and break. In some cases, overheating might cause them to melt. 

2. The coolant system

This is not particularly relevant during the winter season, but it is relatively common for this part to need flushing. The coolant system basically transfers heat from one part of the engine to another, dissipating it in the fins of the radiator. In time, the coolant will become old and dirty, reducing its effectiveness. As such, the coolant system will need to be flushed out every so often. 

3. Hoses

Hoses transfer everything from coolant to antifreeze throughout the system. They are exposed to such intense activity that they will eventually fail and crack. When that happens, replacements are relatively easy but should be performed promptly to prevent other issues in the system. 

Final thoughts

Maintaining a fleet of commercial vehicles is not easy. There are so many things to consider as the cold weather settles in, from the parts that need replacing, to the health and safety of their drivers. You will also eventually need the help of professionals for repairs down the line. 

If you need a source of heavy-duty HVAC parts for your fleet, send us at Simplicity Air a message. We can help make the management of your fleet easier for you as winter rolls in. 

The A/C expansion valve is a vital part of a vehicle’s air conditioning system because it is responsible for the amount of refrigerant liquid that flows throughout the system. When there’s too much refrigerant, the evaporator will get too cold and freeze, and the same issue happens when it’s too hot, which will then cause the evaporator to overheat. 

The A/C valve prevents either of the two situations from happening, which is why it should always be in optimal condition. In this article, we will share how to determine the symptoms of a bad expansion valve so that you can address the problem before things get worse. 

How It Works

First, you need to know how an A/C valve works. As mentioned, it manages the refrigerant flow through a rod inside of it. You can either move the rod up or down, which will then close or open the passageway of the refrigerant. If it’s open, the refrigerant will be able to flow, while it won’t be able to if it’s closed. 

When the AC system is set to a higher temperature, it will cause more refrigerant to flow through the passageway, so it will get colder. This also includes the outside temperature. If it’s hotter outside, the AC will need more refrigerant to create a cool temperature inside the vehicle. 

With that said, the A/C expansion valve calculates the amount of refrigerant that should go through the passageway based on the demands. 

Now, what are the signs of a bad A/C expansion valve? 

If you recognize these signs and don’t address them immediately, you could end up with an A/C system failure. When this happens, the vital parts of your air conditioner will be damaged, which will lead to more expenses and headaches. A replacement will not work for this, but will also be required to replace the other affected components. 

Conclusion 

Don’t let this happen to your vehicle. Instead, commit to preventative maintenance to ensure that your AC system remains in good condition. You don’t want to spend a lot of money just to have it repaired, right? For this reason, keep an eye out for the signs mentioned above because prevention is always better than a cure! 

Let us take care of your mobile fleet services in Ontario at Simplicity Air. You can reduce expensive downtime with our help through our 34-point inspection. Book a fleet check with us today!

As the winter starts to settle in and the temperatures are continuously dropping in Canada, those who didn’t do a sufficient check on their vehicles are scrambling to get things done. Cars, trucks, and any other vehicle drives different during the winter months, and the areas of Ottawa and Niagara often have harsh conditions for driving. While the roads are already a chore to navigate, having a damaged HVAC system during the winter will always be the worst experience. 

While many people can stay safe from long trips during the winter months, truckers are always at higher risk during these months. Long haul vehicles are often put to the test on regular days, and when the freezing temperatures take a toll on them, these can be dangerous for lengthier trips. Trucking companies will likely require fleet maintenance services to inspect heavy vehicles and provide them with heavy-duty HVAC parts and other safety equipment. 

Why Fleet Management Services Are a Must

Driver comfort plays a vital role in safety while taking long-distance trips. The winter is no time for them to stop, as the requirement to ship items and make deliveries is even more in need due to the holiday season. The hardest part about cold weather is how much concentration it takes away from a person. Blizzards and other snowstorms can be harsh on the human body, so driving lengthy routes each week with a broken HVAC system can cause accidents. 

Here is why heavy equipment HVAC services are a must to keep fleet vehicles at their top-condition:

1. They Can Conduct Better Inspections

Using various technologies and monitoring tools, any damages to the truck’s internals can be visible. Mobile fleet technician services can be called in to do a comprehensive examination of your entire lineup of trucks. Vehicle inspection forms that are physical checklists are often not the most reliable, and drivers typically rush through them due to the hassle of manual work. 

Companies that have technologies available to do mobile fleet servicing are meant to do just that, therefore giving drivers more rest and the ability to do their jobs. 

2. They Coordinate Their Maintenance Schedules 

Hiring a mobile fleet servicing company to coordinate maintenance will ensure that even during the busiest times, your trucks will be running and rolling seamlessly. You can also let them take the reins of inspections, which can be beneficial compared to rushing to have it done before winter. 

3. They Uniformly Track All Data Uniformly

Without needing to continuously input data and learn the ins and outs of vehicle inspection, fleet maintenance services can log all essential items in a single document. They likely have years of experience with various trucking fleets, which has developed the ability to craft efficient sheets to monitor data. When everything looks clean and easy to read, there is less confusion and can be stored easily. 

4. They Monitor Expenses and Calculations

One thing that can be damaging to a trucking company is when finances are involved. Trucks are a considerable investment to make, and when anything goes wrong, you will want business records on expenditures and other financial aspects of operations. Monitoring a fleet’s HVAC situation, internal parts, and other replaced components will be good for records and, eventually, taxation periods each year. Keeping everything under record and in safekeeping is a must for all businesses to continue operations. 

Conclusion

Running a truck fleet is no easy task. There are plenty of logistical aspects involved, and it can often be a nightmare when it comes to specific seasons in Canada. To stay on top of the game when it comes to fleet maintenance services, outsourcing processes of inspection to proper companies specializing in HVAC and similar processes is key. 

Simplicity Air is a leading provider of heavy-duty HVAC parts in Canada and offers premium mobile fleet servicing processes to ensure a smooth transition of vehicles during each season. Ensuring your trucks and other heavy vehicles are in top shape will save your company tons of money and make travels safer overall. Contact us to know more about how we can help you. 

The cold days are coming, but that will not stop fleet drivers from doing their work. That means enduring the cold and driving through the snow. But how important is it to use one’s air conditioning unit during this time? How will it affect the performance of one’s vehicle? This winter season leaves some unanswered questions for these drivers, and this article will answer some of them.

Using the aircon in the winter: Is it necessary?

Yes. Using your vehicle’s air conditioning unit during wintertime can help you prevent repairs in the future. Here is what usually happens in a car: One, the system produces warm air inside the vehicle during the cold days, and it is great because it demists your windows. However, the air coming out of your vents is dry, so your air conditioning will act as your vehicles’ dehumidifier. 

Think of your vehicle as a human body. When the air conditioning system and other equipment or devices inside it are not used for a long while, it will seize up, and you will experience poor air circulation. Every aircon is filled with refrigerants and oil, so keeping the fluid inside it running can retain its good condition. Apart from that, make sure to lubricate the system regularly.

Smelly aircon: Is this normal?

Not using your AC for a while can lead to a mouldy smell coming out of it. Your aircon might have bacteria and mould buildup inside, which is what you will smell once you turn it on again for the first time. If there is a musty smell coming from your vents, clean them with an anti-bacterial cleaning product. Ensure you regularly change your cabin filter and use your air conditioner every now and then to prevent buildup.

Driving with open windows while the AC is running: Should I do this?

Driving with the windows open will not damage the vehicle, but it is generally not recommended that you drive too long with your AC turned on and your windows wide open for two reasons. 

First, it is not practical. When your vehicle windows are open, the cold air will not stay inside the car. Second, open windows allow warm air from outside to enter your vehicle. That could put a strain on your AC, which can lead to potential system problems. 

Here is a rule you need to remember when it comes to car temperature: If it is hot and humid outside, never turn your AC on with the windows open. You will only end up losing more if you do.

The AC is not as cold as it used to be: What to do?

The first thing you should do is regas. That means replacing the old refrigerant gas with a new one. Ask a specialist to do this, and the job will be done in less than an hour. In some cases, this particular problem can indicate other severe vehicle issues, so make sure to have your vehicle checked by a professional.

Conclusion

The relationship between winter and your car’s AC can be tricky at times, but once you understand how each part works, things will be easier to grasp. The rule of thumb is to keep all your vehicle’s features working as they should. That is how you keep your system in good condition.

Do you need heavy-duty vehicle air conditioning or other fleet vehicle services in Ottawa? Simplicity Air is a market leader in providing climate-based solutions for fleets. We install and service mobile HVAC units for on- and off-road vehicles. Contact us to learn more about our services. 

As winter looms nearer, the temperatures in Canada begin to drop. Canadians know how brutal winters can be, and these sub-zero ratings make it an issue to move around and conduct work. Working heaters are important to include in your yearly checklist as part of a heating, ventilation, and air conditioning (HVAC) system inspection to ensure the comfort and safety each winter season. 

In the trucking industry, business goes on, as usual, to deliver goods and services to people tirelessly. The issue here is that HVAC systems are only really meant to keep the vehicles heated and warm while running. When truckers have to stop for the night, it can be very uncomfortable to get a good rest while the temperatures are freezing. This is where fleet vehicle services that offer heavy-duty vehicle heating come into play. 

HVAC Technologies for Trucking Fleets

In a truck’s cabin, auxiliary heaters can be fit to promote better idle management of temperatures. There are various types of heaters and HVAC components that all play into creating a comfortable interior environment for truck drivers on the long haul. Here are some of the most efficient auxiliary heating systems that can make your fleet drivers have safer and more comfortable journeys:

1. Water to Air Heaters (WTA)

These heaters use diesel to heat the engine’s cooling water and are pumped in a short or long circulation depending on the temperatures. Lower water temperatures flow into a shorter circulation that goes into the WTA and the HVAC system. 

Higher temperatures of the water go through a more extended circulation that includes the engine. This system reduces the emissions and engine wear due to the already warmed-up state. The ACC device then controls cabin temperatures easily.

2. Air to Air Heater (ATA)

ATA systems function similarly to WTA ones but heat air instead of water. Thanks to a fan that blows air into the ATA from the cabin, the device heats it then leads it back to the cabin. This type of heater controls the cabin temperatures and disengages the ACC control when it is running. WTA is never installed in a vehicle that has an ATA, and vice versa. 

3. Ventilation Systems (HVAC)

HVAC systems suck in air from the outside from the front of a vehicle. This air then moves through an evaporator and a heat exchanger induced by speed or forced by a fan. Recirculating the cabin’s air is also an option to keep the consistency of air within. An HVAC system reduces the heat-up time of cabins during frigid days. HVAC ventilation systems are commonly used and are present in all vehicles, both large and small, as a very efficient and effective heating and cooling system. 

4. Heat Exchangers

Heat exchangers pass heated water from the engine into a circuit that gives off warmth. The WTA can also utilize cooling water for heating, as it passes air through the heat exchanger to heat it, subsequently coursing it out into the cabin. These systems run at a constant temperature of 70 to 80 degrees during a warm and running engine. The rest of the cooling water and heat exchange flows are controlled by a water valve for proper temperature control. 

Conclusion

Heating is essential in the winter, whether you find yourself at home or in a vehicle. Feeling the sharp temperature drops from outside is quite painful and can cause mass discomfort, which can be dangerous for truck drivers going on long haul drives. Keep your fleet vehicle services safe through investing properly into good heating and cooling systems for the interior cabins. 

Simplicity Air provides heavy-duty vehicle heating installation services in Canada for various vehicles. If your fleet requires an inspection for the coming winter, we are your go-to company. Contact us to know more about HVAC systems and their essential features for your heavy vehicle business. 

Fleet vehicles play a crucial role in many companies across various industries. Whether for delivering goods, transporting materials, or accommodating passengers, these machines need to be regularly inspected and maintained to ensure their efficiency and foster the utmost safety of products and people.

Keep in mind that vehicle checkup and upkeep is all the more necessary during the fall to get your fleet ready for the winter. There are also a few vital steps to take in ensuring that your trucks keep up with the seasonal changes and won't easily be subject to wear and tear. 

In this article, we will share four vital maintenance tips on how to prepare your fleet for the cold season:

1. Inspect the coolant system

For the uninitiated, this system regulates the heat and keeps the vehicle's engine cool. It works by sending the liquid coolant through various passages and picks up the heat. For the past months, it served to keep your engine temperature down. But come the cold season, its anti-freezing properties become rather important. This is why you must check and maintain your coolant system, as this also affects your truck's heating system.

2. Keep the pneumatic system's air clean and dry

The air system of your truck is typically designed for non-braking functions. It serves to provide automatic transmission, driver assistance, and other safety systems and emissions controls. It’s imperative to keep it always clean and dry as it affects a wide range of components. Ultimately, doing so before the winter helps you avoid moisture build-up and prevents contaminants from getting into your truck's system.

3. Replace the air dryer cartridge yearly

Always remember the rule of thumb of changing your air dryer cartridge on an annual basis. Likewise, it's best to have the yearly replacement in the fall to prepare for the winter, which is all the more necessary for trucks, such as vocational trucks, that utilize a high air volume. While you're at it, check the purge valve and heating harness for excess corrosion on the dryer and address it immediately. Know that it's highly recommended you replace and use OE cartridges as the most effective moisture-removing solutions.

4. Lubricate the engine components

Keep in mind that it isn't only the coolant and water that you must monitor during a cold season; a far more critical aspect is the lubrication of your engine's components. The chances are that your truck parts or components are put under lots of stress and pressure during winter. Along with this is the fact that the lubricant's viscosity takes longer to warm up and work. For this reason, you have to pay particular attention to the lubricant to ensure it flows as smoothly as possible, and opt for a lower viscosity oil appropriate for your engine during the cold season.

Conclusion

At this point, you now know how to prepare your fleet for the cold season. All it takes is to inspect the coolant system regularly, keep the pneumatic system's air clean and dry, replace the air dryer cartridge yearly, and lubricate the engine components. With all these maintenance steps in place, you'll make your trucks more resilient during the winter season, avoiding business downtime and unnecessary repairs along the way!

Are you looking for mobile fleet servicing? We've got you covered! We provide red-dot heating and air conditioning services in Canada with climate-based solutions for on-road and off-road heavy good vehicles. If you need fleet maintenance services to get ready for the cold season, get in touch with us today to see how we can help!

Whether it’s to heat your car for a cozy drive during the colder months or keep you cool when the summer solstice hits, your car’s HVAC unit plays a crucial role in creating a comfortable journey on the road. However, many drivers easily overlook the importance of keeping your AC clean and full-functional.

Your car’s AC unit may not be critical in getting you from point A to B, but it can affect other factors. Riding in a car that circulates dirty air - be it due to a build-up of dust, pollen, fur, and other small debris - can bog down your experience and car’s performance in more ways than one.

 Not only does it mean dust bunnies can escape your car’s AC, but it can make your car more vulnerable to wear-and-tear.

What’s the Importance of Cleaning Your Car’s AC?

Nobody likes to stay inside a compact and filthy space, but beyond shaking down your comfort, a dirty filter can compromise your car’s performance. This is because the debris can force your car’s AC unit to work harder, which can put unnecessary pressure on your engine.

The extra effort it puts can eat up plenty of energy, lowering your car’s fuel efficiency as it dedicates a significant portion to churning more fuel while creating less cold air, which can be expensively wasteful.

Deep Cleaning Your AC Unit Periodically or Annually

Seeing as how the AC unit can impact both your comfort as a driver and your car’s fuel usage, it’s important to understand the best times to give your AC unit a much-needed clean-up. When it comes to AC maintenance, you can implement two schools of thought.

For one, it also helps you have a professional deep clean your car’s AC system annually to effectively remove every deep-seated grime in between the nooks and crannies of your unit. On the other hand, cleaning the internal components of your AC every few months can help keep dust particles at bay.

Cleaning the filter or spraying the unit’s condenser every few months, for instance, can do wonders in bringing your car’s performance and functionality up to speed.

The Bottom Line: Keep Your Drive Smooth and Clean By Keeping Dust Bunnies Out of Your Car’s AC

Driving with dust bunnies spilling out of your car’s air conditioner can create an uncomfortable journey. From triggering allergic reactions, adding unnecessary strain to the engine,  to lowering the overall experience on the road, keeping your car fresh and clean is crucial for you and your car’s efficiency.

You don’t need to get your hands dirty once you notice your car’s AC needs a much-needed TLC. Here at Simplicity Air, we offer mobile climate control solutions in Ancaster, Ontario that can improve your HVAC units for both on and off-road vehicles. Get in touch with us today to see how we can keep your air clean and freshen your driving experience.

Fleet vehicles play a crucial role in the continuous operation of a business or organization. Whether it is a fleet of cars, SUVs, or trucks, they help your company meet your transportation needs. As they are subject to constant use and abuse, they should be regularly inspected and maintained. It is crucial to set additional maintenance for your vehicles during the summer as they're exposed to hot weather and high humidity levels that the vital components of your vehicles may be subject to sudden wear and tear.

In this article, we will explore five components requiring fleet vehicle services that you should look out for during summer:

1. Tires

The tire pressure can easily and quickly spike during the summer due to the hot weather. The chances are that your tires can become under-inflated, over-inflated, or worn out. Keep in mind that such conditions can compromise your safety on the road. To avoid a possible mishap, perform a tire pressure check at least once a month and regularly check for tread depth and inflation before driving on the road. Ultimately, your tires will ensure your safety as you drive.

2. Belts and hoses

As you may or may not be aware of, belts and hoses serve as connectors, enabling your vehicle's parts and components to work together seamlessly. However, the problem is that extreme heat, constant vibration, and outdoor elements can damage your belts and hoses over time. This is why they should be inspected, repaired if necessary, and replaced every 60000 to 100000 miles of driving.

3. Oil and filter

It's vital to check your vehicle's motor oil and air filter, especially during summer, as extreme heat can lead to the breakdown of your motor oil. It's recommended to change your oil every 3000-5000 miles but perform it sooner under extreme weather conditions. On the other hand, the air filter can be easily clogged during the winter. Be sure to change it every 12000-15000 miles to ensure a smooth and safe driving of your vehicle fleet during any weather condition.

4. Cooling system

The heavy-duty vehicle's cooling system serves to cool your engine and keep you comfortable inside your vehicle. Keep in mind that it may have to work harder during summer due to a high temperature, and if left neglected, it may end up damaged, and your engine may get overheated. Be sure to have your cooling system flushed and refilled every 24 months, and it's best to perform all these before the summer starts.

5. Battery

On top of the vehicle components, the battery of the vehicle shouldn't be overlooked as it can also be vulnerable to heat during the summer. As it consists of various chemicals, the battery may experience overcharging, chemical evaporation, and corrosion under extreme heat, which may eventually cause some driving issues or may die out. As the car battery generally lasts for three to five years, be sure to replace it when the time comes or when it's necessary.

Conclusion

A fleet of vehicles must perform at the highest level of efficiency and in the most cost-effective way. To get the most out of the vehicles, you must schedulefleet maintenance services regularly. Likewise, remember to monitor the key components that require additional attention in the summer—tires, belts and hoses, oil and filter, cooling system, and battery. Ultimately, preparing a fleet for the hot months is a necessary step to ensure its optimal performance.

Are you looking for fleet maintenance services in Ontario for the summer? As we specialize in climate-based solutions for fleets, we will provide you with mobile HVAC unit services for both on and off-road vehicles. Get in touch with us today to see how we can help!

For businesses that need to use climate-controlled transportation, managing the fleet can be very tricky. Any vehicle that experiences downtime can affect delivery times, production efficiency, and service quality. When a fleet vehicle is out of service, it isn’t earning back its investment cost. For this reason, it is essential to keep your fleet running at full capacity as much as possible.

One of the most challenging aspects of managing fleets of vehicles is coordinating repairs and preventive maintenance work. On the one hand, you want to maximise your productivity by keeping every member of your fleet in service. On the other, you need to take them out of the rotation to give them a thorough inspection and tune-up or replace mechanical parts to prevent breakdowns that would cause long delays.

When it comes to fleet maintenance, technology has come a long way in terms of coordinating this complicated dance. Some HVAC service providers can provide sophisticated software that can manage, track, collect, and report data regarding your vehicles so you can make business decisions with information readily available and easily accessible. Here are more ways technology can help you improve your fleet management and maintenance:

  1. Harmonise maintenance schedules

If you have twenty, thirty, or possibly more mobile units that are ploughing your routes every day, creating a maintenance schedule that won’t affect productivity can be tough. Utilise software to visualise your plan and find the most efficient time for each vehicle to be taken in for servicing. You can even see automobiles in reserve that can be deployed to pick up the slack.

  1. Make and collect service reports and repair requests

For every vehicle you own, you have as many drivers. Each one must report and make service requests. The paperwork involved in processing so many requests can be overwhelming and can take time to review, log, and act on. With fleet maintenance software, you can digitise vehicle-related reports and collect them in a central database for easy reference.

  1. Improve fleet efficiency

When you are running a business, you should always be looking for ways to operate more efficiently. You can integrate all the data about all your equipment into a single comprehensive database so you can track trip routes, fuel usage, and even equipment status. Having this data ready can help you find ways to get more from a macro perspective such as consolidating deliveries, opening new trade routes, or establishing a service hub in a new area.

  1. Monitor expenses

Tracking your assets is crucial to making sure your investments are safe and productive. Some software is sophisticated enough to provide real-time fuel usage. Other things that are possible using technology includes tracking unique expenses and viewing trends to see which repairs are most common and what drivers and operators can do to avoid them.

Fleet vehicles are expensive to acquire for any business. They also demand a lot of maintenance, and repairs can be very costly. Leveraging technology can streamline a lot of the work so you can keep every vehicle in service and operate at efficient levels and get a maximum return on your investment.

Do you need mobile HVAC fleet maintenance services in Ontario? We offer preventative maintenance, equipment servicing, and custom manufacturing. We are a one-stop-shop for quality mobile climate control parts, installs, and servicing. Call us today to find out more!